Sometimes you just need a Thing to do something. Some nameless tempory tool that you just make when you need it and probably don’t even save because you may never need it again. So here is one of these tools.
So I can hear the question from here. “What the bleep is that thing and what is it for?” Well there was a problem where a hole needed to be made in an ackward posistion in the side of a metal building. The hole could be drilled from the outside but it had to be marked from the inside. That crazy punch thing had about 18″ of 3/4″ pipe so it could reach the spot and dent the metal to mark it for drilling. So the quick way was to bundle enough screws to cover the end of the pipe so the pipe would drive the screws and enough wire and duct tape to keep the screws pointing the right direction and poof. A temporary tool was born. And the nice thing was it worked ,but the hole is drilled and I no longer need a short spear like thing so it can be possible inspiration for future problems.